MOBILE COLUMN LIFT SYSTEMS

MP LIFTS - PORTABLE, POWERFUL, & PRODUCTIVE

ABOVE GROUND DESIGN

• Smooth electronic/hydraulic operation means no acme or ball screws to wear.
• Efficient 2 H.P. high torque motors with gravity down means minimal power requirements.
• Lifts can be setup as 2, 4, 6, or 8 column units.
• Lifts can be operated from any individual column.
• Available capacities in either 15,000 or 22,000 lb. per column.
• Capacities from 60,000 to 176,000 lbs. for raising the heaviest, largest, or longest vehicles.
• Balanced columns with spring loaded steering wheel for 1-man, simple to move portability.
• High rise jack stands allow vehicle to be raised and columns removed for either wheel-free service, or lifting another vehicle.
• Proven 5 year operational record throughout North America.
• Not a new hydraulic mobile lift with an unproven field history.

SAFETIES

• Multi-position mechanical locks on each column engage the full length of travel.
• Automatic level control of PLC monitors each column's height to make leveling adjustments as needed.
• Infinite position hydraulic safety systems consisting of pressure compensated flow control valving, and velocity fuses.
• 24 volt control voltage for operator safety.

FEATURES

• Optic encoder in each post assure equal raising and lowering of all vehicles.
• Designed to lift all vehicles with rims up to 24.5 and down to 13" with optional small wheel adaptors.
• Operate 1, 2, 4, 6, or all 8 posts in unison, or individually for maximum repair flexibility.
• Hydraulic drive system requires no maintenance, lubrication, nor are there wear points as on screw driven mobile lifts.
• Lifts can be lowered in a "no power" situation without the use of cranks.
• Crowned shape wheels ease moving and repositioning the columns.
• Fully inclusive 1 year parts and labor warranty
• Using optional jack stands, remove the MP columns to raise a vehicle in an adjoining bay.

The MP series lifts can be operated from any post, in unison, or individually with all posts featuring an emergency shut-off system	PLC (program logic control) synchronization assures constantly level raising & lowering of all columns at one time. No expensive or hard to replace circuit boards. All Siemens® PLC Components are easily obtainable	Low maintenance, direct drive hydraulic lifting system is backed with multi-position, automatic engaging mechanical safety locks the full length of the lifts travel.
The lift's optic encoder reads the sensor strip (shown) to assure constantly level raising & lowering.	One man operation to position & remove MP columns from vehicle tires.	4 optional models of high rise jack stands allow columns to be removed to raise another vehicle.
MP mobile column lifts offer full under vehicle access for all types of repairs, service, and P.M's.	Optional wheel reducers allow servicing vehicles with 13" to 16" tires on the same lift as your heavy equipment