Quality is Built into Every Housing

• Epoxy coated interior and exterior heads and bowls
• Threaded condensate discharge connection
• Bayonet head to bowl connection up to 170 scfm (289 m3/h)
• Thermoset polyurethane liquid level indicator
• Every housing tested to a 5:1 factor of safety

Quality is Built into Every Filter Element

• All stainless steel inner and outer cores
• Complete seam welded cores having a burst pressure of 65 psid (4.5 bar)
• Coated foam sleeves providing protection against chemical attacks
• 100% silicone free

Grade A - Bulk Liquid Separator

• A labyrinth style flow path removes liquid water from the air stream by forcing abrupt directional changes
• Efficient to flows as low as 5% rated flow
• Removes up to 30,000 ppm liquid contamination at efficiencies greater than 90%

Grade B - Separator/Filter

• Removes up to 25,000 ppm liquid water from an air stream at a 99%+ efficiency rate
• In-depth coalescing bed captures solid and liquid contaminates 3 micron in size and larger

Grade C - Air Line Filter

• Coarse coalescing filter capable of providing ISO 8573.1 class 2 solid and class 3 oil content air
• Captures and removes particles 1.0 micron and larger in size
• Remaining oil content as low as 0.8 ppm (1.0 mg/m3)

Grade D - Desiccant Afterfilter

• Designed to removes solid particles down to 1.0 micron in size in a dry air flow
• Designed as an afterfilter for heatless desiccant dryers
• Outside/in flow, prolongs the life of the filter

Grade E - High Efficiency Coalescing Oil Removal Filter

• Capable of providing ISO 8573.1 class 1 Solids and Class 1 oil content air quality
• Captures 99.99+% of all oil aerosols
• Reduces oil aerosol content to 0.008 ppm (0.01 mg/m3)

Grade F - Maximum Efficiency Coalescing Oil Removal Filter

• Capable of providing air quality greater than ISO 8573.1 class 1 solids and oil content air quality
• Captures 99.999+% of all oil aerosols
• Reduces oil aerosol content to 0.0008 ppm (0.001 mg/m3)
• Best suited to critical applications

Grade G - Oil Vapor Removal Filter

• Capable of providing ISO 8573.1 class 1 solid and oil content air quality
• Activated carbon adsorption filter
• Contains 2x more carbon than supplied by industrial activated carbon filters
• Reduces total oil content (as vapor) to below 0.003 ppm

Elements Designed to Extend Life and Reduce Pressure Losses

• Large 45% open area stainless steel cores provide even air flow through media at minimal pressure losses
• Filter media with over 96% open area lowers pressure losses while matrix blended media increase capture efficiency
• Thick filter bed provides extended life without adding pressure losses

Reliable Differential Pressure Gauges & Monitor Save Energy

• Three available methods of Differential pressure indication
• Electronic intelligence of the Element Monitor
• Face Gauge
• Slide Indicator
• Changing the filter elements at the proper time saves energy and protects the compressed air system